i have a 37" daiwoo tv (odd make but a sweet panel) to hang in my bedroom, trouble was i needed a unit to swivel and i came across this. I had surfed ebay and several sites (been a northerner I wanted cheap but quality) and thought what the hay I would give it a try. I know my tv is 1" larger than this is ment to take but the tv was alot lighter than the max weight.
i was suprised at the weight of the bracket it was over 3/4 of the tv`s. fitting is a tad hard due to its weight so i would recommend making a hole template first, this will save u alot of hassel (or 2 ppl to hold it to the wall while u lvl it and mark the holes), The mount the tv hangs off has some rotaional correction built in.
when folded flat against the wall it is about 10-14cm deep (not inc. the tv) so isnt a flush mount and is perfect for bedrooms or as the item describtion says a room corner if you need to move the tv for better view in bed ect. moving the tv on the mount isnt hard and anyone could do it.
it comes will all the fittings you could possibly need for any tv even standoffs for curved tv backs. You will need a 1/2" stone drill for walls and a ratchet socket wrench is a must, a standard wrench will do but a ratchet makes it alot easyer.
other than the fitting hassel (which is expected) its a good wall mount.